Host Interface
• Up to six Gigabit Ethernet ports with teaming
(fail-over/load-balancing)

• Up to two 10Gb Ethernet

• Up to 2 SDR/DDR/QDR
Infiniband (10Gbps/20Gbps/40Gbps)
Processor

• Up to two Intel® Xeon® Dual/Quad Core processors

Memory
• Up to 16GB System memory with ECC

RAID Subsystem
• RAID level 0, 1, 0+1, 3, 5, 6, 10, 50, 60 or JBOD

• 1GB battery backed cache, with ECC

• Online Volume expansion and volume migration

• Global and dedicated hot-spare disks

• Multiple RAID volume support

• Auto Volume rebuilding

• Greater than 2 TB per volume set Drives:

• Supports up to 12/16/24 hot-swap SAS/SATAII HDDs
in single box
(Expandable by adding our storage expansion options)

Network File Protocols
• CIFS/SMB, NFS, NFS over RDMA, FTP

Block-Storage/SAN Protocols
• iSCSI target, SRP target

Supported Clients
• Windows, Linux, FreeBSD, Solaris, Unix, Apple

Storage Expansion
• Expandable to 384 TB by using Tyrone expansion
solutions.

Redundancy/Fault-tolerance features
• Redundant Power Supply

• Host interface fail-over

• Support for RAID6 (can tackle simultaneous failure
of two HDDs)

• Multiple Snapshots (point-in-time image of volume)
with scheduling

• Volume/Share Replication

• Remote Replication (Block level replication to a
2nd unit) with failover/high-availablilityManagement/Administration/Monitoring

• Management UI via Web based GUI

• IPMI 2.0 compliant management for system
health monitoring

• Support for S.M.A.R.T and SNMP

Processor/Memory
• Processor: Single or Dual Intel® Xeon® Quad-Core
processors

• Memory : 2GB – 16GB DDR2 memory with ECC

RAID/Disk Subsystem
• RAID level 0, 1, 0+1, 3, 5 and 6 with global/dedicated
hot-spare disk support

• 256MB/1GB battery backed cache with ECC

• Online volume expansion and volume migration

• Instant RAID volume availability & Auto Volume
Rebuilding

• Greater than 2 TB per volume set (64-bit LBA support)

• Multiple RAID volume support

• Supports up to 12/16/24 hot-swap SAS/SATAII HDDs
in single box

• Supports up to 384 HDDs using multiple controllers
and cascaded storage expansion boxes

Host Interface:
Default:
2 x Gigabit Ethernet with fail-over/load balancing
Optional upgrades:
Up to 6 x Gigabit Ethernet with teaming
(fail-over/load-balancing)
Up to 2 x 10Gb Ethernet with fail-over
Up to 2 x Infiniband (SDR/DDR/QDR)

Management
• Web Based GUI

• IPMI 2.0 compliant management for system
health monitoring

• Support for S.M.A.R.T and SNMP

Environmental Specifications:
Temperature : +5oC to +35oC Operating, -40oC to
+70oC Non-operating
Humidity : 15% to 80% non-condensing (Operating)
5% to 90% non-condensing (Non-Operating)